| IEEE Standard |
IEEE802.3 10Base-T IEEE802.3u 100Base-TX IEEE802.3u 100Base-FX IEEE802.3ab 1000Base-TX IEEE802.3z 1000Base-SX/LX IEEE802.3x Flow Control and Back pressure IEEE802.3at Power over Ethernet+, PoE+ IEEE802.3af Power over Ethernet, PoE IEEE802.1q Tag VLAN |
|---|---|
| Fiber Ports | 100/1000Base-SX/LX |
| RJ45 Ports | 10/100/1000Base-T |
| Data Process Architecture | Store and Forward mode or Pass Through mode Set by DIP SW |
| Jumbo Frame | 9K bytes |
| Fiber Parameters |
Fiber Cable (Multi-mode): 50/125um, 62.5/125um Fiber Cable (Single-mode): 9/125um Wavelength: 1310nm (Multi-mode/Single-mode) Available distance: SFP, Distance depend on plug-in Fiber Transceiver |
| Link Fault Pass Through (LFPT) |
TX- Fiber: If TX port link down, the media converter will force Fiber port to link down Fiber-TX: If Fiber port link down, the media converter will force TX port to link down |
| DIP Switch |
ON: Disable Alarm For Power Loss OFF: Enable Alarm For Power Loss ON: Disable Alarm For Port Link-Failure OFF: Enable Alarm For Port Link-Failure ON: LFP Enable, OFF: LFP Disable Data process Architecture : ON : Pass through mode OFF : Store and Forward Switch mode Fiber Speed: OFF: 1000Base-X ON: 100Base-X PoE Output OFF: Enable PoE output ON: Disable PoE output |
| Connector and Pin Assignment |
SFP Slot RJ-45 Socket: CAT-3/5 (10/100/1000Mbps) Twisted Pair cable Auto MDI/MDI-X and Auto-Negotiation Function Support RJ-45 Port support IEEE 802.3at/af End-Span, Alternative A mode. PoE (VCC+): RJ-45 pin 1, 2. PoE (VCC-): RJ-45 pin 3, 6. Data (1,2,3,6,4,5,7,8 ) |
| LED |
Per Unit :Power 1 (Green ) ,Power 2 (Green) ,Fault (Amber ) Fiber LNK/ACT (Green): ON: Connected to network, OFF: Not connected to network , BLK: Receive /Transmit Data Fiber Speed : Yellow : 1000Base-X, Green : 100 Base- X RJ-45 Port: Speed: 10 (OFF), 100 (Green), 1000 (Yellow) LNK/ACT for RJ45(Green): ON: Connected to network, OFF: Not connected to network, BLK: Networking is active PoE Status (Green): Flash: PoE Fault (Over-load or short ), ON: PoE normal working, OFF : PoE No Power output |
| Reverse Polarity Protection | Present for power input |
| Overload Current Protection | Present |
| Power Supply | 12/24/48VDC (9.6~57VDC), Redundant power with polarity reverse protect function and removable terminal block |
| Alarm Relay Contact | Relay outputs with current carrying capacity of 1 A @24VDC |
| Removable Terminal Block | Provide 2 Redundant power, Alarm relay contact, 7 Pin |
| Operating Temperature |
0 ~ 60°C -20 ~ 75°C (-T models) |
| Operating Humidity | 5% to 95% (Non-condensing) |
| Storage Temperature | -40 ~ 85°C |
| Housing | Rugged Metal, IP30 Protection |
| Case Dimensions | 106 x 38.6 x 142 mm (D x W x H) |
| Installation Mounting | DIN Rail mounting or wall mounting |
| EMI |
FCC Part 15 Subpart B Class A CE EN 55022 Class A EN 61000-6-4 - Emission for industrial environment |
| EMS |
EN61000-6-2 – Immunity for Industrial environment EN61000-4-2 (ESD) Level 3, Criteria B EN61000-4-3 (RS) Level 3, Criteria A EN61000-4-4 (EFT) Level 3, Criteria A EN61000-4-5 (Surge) Level 3, Criteria B EN61000-4-6 (CS) Level 3, Criteria A EN61000-4-8 (Magnetic Field) Level 3, Criteria A |
| Safety | UL60950-1 (pending) |
| Rail Traffi c | EN 50121-4 |
| Shock | IEC 60068-2-27 |
| Freefall | IEC 60068-2-32 |
| Vibration | IEC 60068-2-6 |
| MTBF | TBD (Above 30 years ) |
| Warranty | 5 years |
898995850
