| IEEE Standard | IEEE802.3 10Base-T IEEE802.3u 100Base-TX , 100Base-FX IEEE802.3ab 1000Base-TX Gbit/s Ethernet over twisted pair IEEE802.3z 1000Base-X Gbit/s Ethernet over Fiber-optic IEEE802.3x Flow Control and Back pressure IEEE802.3ah OAM management IEEE802.1q Tag VLAN |
|---|---|
| RJ45 Ports | 10/100/1000Base-T(X) |
| Fiber Ports | 100Base-X or 1000Base-X set by Web Supports Auto Laser Shutdown (ALS) |
| CPU watch dog | Present |
| Push Button | Reset, Load default setting |
| Jumbo Frame | 9K bytes |
| Fiber Parameters |
Fiber Cable (Multi-mode): 50/125um,62.5/125um Fiber Cable (Single-mode): 9/125um Wavelength: 1310nm (Multi-mode/Single-mode) |
| Link Lose Forward |
TX-Fiber: If TX port link down, the media converter will force Fiber port to link down Fiber-TX: If Fiber port link down, the media converter will force TX port to link down |
| Connector |
Fiber: SC (Multi-mode, 500M), SFP Slot RJ-45: CAT 5e (10/100/1000Mbps) Twisted Pair cable Auto MDI/MDI-X and Auto-Negotiation Function Supports |
| LED |
Per Unit : Power 1 (Green), Power 2 (Green), Fault (Amber) Fiber LNK/ACT (Green): ON: Connected to network OFF: Not connected to network BLK: Receive /Transmit Data Fiber speed : Yellow : 1000Base-X Green : 100Base-X RJ-45 port: Speed: 10 (OFF), 100 (Green), 1000 (Yellow) LNK/ACT for RJ45(Green): ON : Connected to network/ OFF: Not connected to network/ BLK: Networking is active |
| Reverse Polarity Protection | Present for power input |
| Overload Current Protection | Present |
| Power Supply |
12/24/48VDC (9.6~60VDC) , Redundant power with polarity reverse protect function and removable terminal block Provide DC Power JACK adapter cable for external Power adapter |
| Alarm Relay Contact |
Relay outputs with current carrying capacity of 1 A @24VDC Relay alarm output for power fail or port link down |
| Removable Terminal Block | Provide 2 Redundant power, Alarm relay contact, 6 Pin |
| Power Consumption | 4.8 W |
| Operating Temperature |
0 ~ 60°C -40 ~ 75°C (-T models) |
| Operating Humidity | 5% to 95% (Non-condensing) |
| Storage Temperature | -40 ~ 85°C |
| Housing | Rugged Metal, IP30 Protection |
| Case Dimensions | 106 x 38.6 x 142 mm (D x W x H) |
| Weight | 0.62kg |
| Installation Mounting | DIN Rail mounting or wall mounting |
| EMI | FCC Part 15 Subpart B Class A, CE EN 55022 Class A |
| EMS |
EN61000-6-2 – Immunity for Industrial environment EN61000-4-2 (ESD) Level 3, Criteria B EN61000-4-3 (RS) Level 3, Criteria A EN61000-4-4 (EFT) Level 3, Criteria A EN61000-4-5 (Surge) Level 3, Criteria B EN61000-4-6 (CS) Level 3, Criteria A EN61000-4-8 (Magnetic Field) Level 3, Criteria A |
| Safety | UL60950-1 |
| Rail Traffi c | EN 50121-4 |
| Shock | IEC 60068-2-27 |
| Freefall | IEC 60068-2-32 |
| Vibration | IEC 60068-2-6 |
| MTBF | 559,059 hrs |
| Warranty | 5 years |
| Management |
? Ingress/Egress bandwidth control with 64K granularity ? Supports IEEE802.3ah OAM management, loop back and dying gasp (Remote power failure detection) ? Firmware upgrade via Web ? Web management on stand-alone (Local) ? Supports SNMP, MIB for management ? OAM In band management (Remote) ? Supports DHCP client for automatic TCP/IP configuration ? Supports 802.1Q tag VLAN,16Tag VLAN group, RMON counters display (Stand-alone only) ? Local configuration : IP configuration, password setting, converter configuration, port configuration, MIB counter ? SNMP configuration, VLAN group configuration, alarm configuration ? Remote configuration : IP configuration, converter configuration, port configuration, MIB counter, VLAN group configuration, alarm configuration |
|---|---|
| OAM |
? Supports in-band remote management from FRM220 rack management ? OAM Function: IEEE802.3ah configuration, Loopback test, IEEE802.3ah status |
| Diagnostic & Monitor |
? Remote loop back test ? Dying gasp (remote power failure detection) ? Supports Link Fault Pass-Through (LFPT) Function ? Supports DDM diagnostic function for SFP fiber transceiver ? Broadcast/Multicast/Unicast storm filter ? SNMP alarm trap for power loss and port link down |
898995850
