供应欣顺AS-626,欣顺TPU胶黏剂，胶水级TPU
欣顺AS-626,欣顺TPU胶黏剂，胶水级TPU，产    品    说    明    书  
Product    information  

1.        品                                    名：                sheenthane            AS-626  
2.        外                                    观：                                            白色颗粒  
3.        用途及使用方法：                PU    adhesive，各种材质接著剂，如TPE、PVC、PU、布、真皮等。不黄变PU    adhesive,搅拌溶于MEK（甲乙酮），Acetone(丙酮）或EAC（醋酸乙酯）中，及TOL(甲苯）稀释之。（溶剂组成可自行调整），固成份约13~16%，黏度约300~500CPS(25℃），一般建议配方为MEK、丙酮、甲苯各1/3，固成份约13.5~15%.            此混合液直接当PU接著剂使用。  
4.        特                性：            A    .对各种材质具有优秀接著力      
                                                                                        B    .初期接著力佳  
                                                                                        C.    耐水解性佳  
                                                                                        D    .可单独使用，亦可与架桥剂配合使用  
                                                                                        E.    低温流动性佳  
5.        黏                    度:        固成份15%，溶剂MEK,25℃,1600~2000CPS，以TOL或EAC代替部份MEK时，可提高黏度。  

6.        接        著    力:                黏著反应温度            55~65℃  
                                                                                材                                            质:    PVC                            PVC  
                                                                                    5分钟后拉力强度2.5kg/cm以上  
                                                                                30分钟后拉力强度5.0kg/cm以上  
                                                                                24小时后拉力强度7.5kg/cm以上  
                                                                                使用架桥剂时，拉力强度会再提高约20%以上  
          

7.        包                        装:            25kg    多层纸袋          
8.        保    存    期    限:        1年以上,于阴凉处