供应JP08A单轴研磨抛光机
本机床主要用于大平面、大球面的粗磨、精磨和抛光。机床的主轴转速，摆架摆次可以根据加工零件的需要单独变频无极调速，摆架压力由气压控制，也可以用配重块来调整压力。
JP08A单轴研磨抛光机主要技术参数
JP08A Single-axle Grinding Polisher Main technical specification
加工范围
Processing scope ≤Φ700mm 磨盘直径
Millstone dia. Φ800mm
主轴数 删掉 水盆直径 删掉
主轴联接
Main axle coupling M68×6 定位圆φ72mm
M68×6 Setting circle φ72mm 主轴转速
Speed of main axle 0～50转/分（可根据客户要求）
0～50RPM (as required)
主轴精度
Main axle precision
轴向、径向跳动≤0.02mm
Axial and radial run-out ≤0.02mm
主摆
Main swing shelf
摆盘最大可调范围170mm，
摆杆可抬角度+20°,-10°
摆杆收缩范围110mm
摆次0～50次/分
Max. adjustable range of swing disc: 170mm
Movable angle of the swing pole: +20°,-10°
Stroke range of the swing pole: 110mm;
Swing times: 0～50SPM
幅摆
Swing amplitude 摆杆收缩范围150mm
Stroke range of
the swing pole 150mm 总功率
Total power
4.4Kw 380V
总重量
Gross weight 约1000Kg
About 1000Kg 外形尺寸
Size 1500×1500×1500(mm)
Mainly used for rough grinding, fine grinding and polishing of large size plane lens, convex-concave lens and aspheric lens. The main-axle rolling speed and swing shelf swing times of the Polisher can be adjusted separately as variable frequency based on different proceeded parts, and the pressure of the swing shelf should be controlled by air pressure or be adjusted by using the balancing weight.
*您的姓名：
*联系手机：
固话电话：
E-mail:
所在单位：
需求数量：
*咨询内容:
898995850
