
供应润新软化阀,全自动软化阀报价
1) F74A3,F63B,F65B3功能特点
F74A3最大产水量为2m³/h,F63B最大产水量4.5m³/h,F65B3最大产水量为4.5m³/h,。
端面密封片启闭不泄漏,机械性能可靠。
具有健盘锁定功能:超过一分钟键盘自动锁定,再次操作需重新解锁,以防误操作发生。
LED动态彩条显示:彩条闪烁表示处于运行状态,否则表示处于再生状态。
长期停电提示:停电超过三天,时钟长期闪烁提示需重新设置当前时间,已设再生时间不变。
单罐型控制阀再生时出水口不出水。
带有信号输出端口:由电子控制主板里的常开、常闭、公共三个端口引线外接电磁阀或增压泵。
一阀具有流量延滞型(A-01)或流量即时型(A-02)两种流量模式,可通过程序内参数的设定而更改
可设定最大间隔再生天数:表示无论设定或运行了多少流量,超过最大再生天数(0—40天)后流量还未到达设定值时均启动再生。
Characteristics of F74A3,F65B3 and F63B
It adopts the seal slice, scuff resistance, corrosion proof for opening and closing. Mechanical part is more reliable.
Keyboard locked function: If the keyboard has not been operated within one minute, it will be locked by itself to avoid incorrect operation.
LED colorful screen: The colorful screen welter continuously showing it is in normal service state. If the power has been cut over 3 days, the clock figure will flicker continuously to remind to reset the current time, but other parameters are kept.
No water flows out while single tank type control valve regeneration.
Have output signal connector: There are three output signal connectors on PC board: N/O, N/C. COM which could be connected with booster pump and solenoid valve
One valve has two kinds of regeneration controlling mode: A-01(volume delayed) and A-02 (volume timely). It could be exchanged by adjusting the parameter.
It could set up maximal interval regeneration days. Even through the capacity doesn’t reach at the set value, but it exceeds the maximal interval regeneration days (0-40 days), then I will start up regeneration.
Have interlock function.
参数表
序号 产品名称 规格型号 流量 中心管 接口 适用罐体
(m³/h) (mm)
1 全自动软化阀 F65B 2 6分 6分 Φ200-350
2 全自动软化阀 F63B 4.5 6分 1寸 Φ250-400
3 全自动软化阀 F74A 10 1.5寸 2寸 Φ500-900
4 全自动软化阀 F77B 18 2寸 Φ1000-1200
5 全自动软化阀 F78A3 40 Φ1200-1500
*您的姓名:
*联系手机:
固话电话:
E-mail:
所在单位:
需求数量:
*咨询内容: