10Gb/s SFP+ 10km Transceiver
Product Features
l Up to 11.1Gbps Data Links
l Up to 10km transmission on SMF
l Power dissipation < 1.5W
l Uncooled CWDM DFB Laser and PIN receiver
l Metal enclosure, for lower EMI
l 2-wire interface with integrated Digital Diagnostic monitoring
l Hot-pluggable SFP+ footprint
l Specifications compliant with SFF 8472
l Compliant with SFP+ MSA with LC connector
l Single 3.3V power supply
l Case operating temperature range:0°C to 70°C
Applications
l 10GBASE-LR/LW 10G Ethernet
Standard
l Compliant to 802.3ae 10GBASE-LR/LW
l Compliant to SFF-8431
l RoHS Compliant.
Product selection
HTFPPC-XX96-10BD
|
Wavelength |
xx |
Wavelength |
xx |
|
1270 nm |
27 |
1370 nm |
37 |
|
1290 nm |
29 |
1390 nm |
39 |
|
1310 nm |
31 |
1410 nm |
41 |
|
1330 nm |
33 |
1430 nm |
43 |
|
1350 nm |
35 |
1450 nm |
45 |
Absolute Maximum Ratings
|
Parameter |
Symbol |
Min |
Typ |
Max |
Unit |
Note |
|
Storage Temperature |
Ts |
-40 |
- |
85 |
oC |
|
|
Storage Ambient Humidity |
HA |
5 |
- |
95 |
% |
|
|
Operating Relative Humidity |
RH |
- |
- |
85 |
% |
|
|
Power Supply Voltage |
VCC |
-0.3 |
- |
4 |
V |
|
|
Signal Input Voltage |
|
Vcc-0.3 |
- |
Vcc+0.3 |
V |
|
Recommended Operating Conditions
|
Parameter |
Symbol |
Min |
Typ |
Max |
Unit |
Note |
|
Case Operating Temperature |
Tcase |
0 |
- |
70 |
oC |
Without air flow |
|
Power Supply Voltage |
VCC |
3.14 |
3.3 |
3.47 |
V |
|
|
Power Supply Current |
ICC |
- |
|
350 |
mA |
|
|
Data Rate |
BR |
|
10.3125 |
|
Gbps |
|
|
Transmission Distance |
TD |
|
- |
10 |
km |
|
|
Coupled fiber |
Single mode fiber |
9/125um SMF |
||||
Optical Characteristics
|
Parameter |
Symbol |
Min |
Typ |
Max |
Unit |
Note |
|
Transmitter |
|
|
|
|
|
|
|
Output Opt. Pwr |
POUT |
-6 |
|
-1 |
dBm |
1 |
|
Optical Wavelength |
λ |
λ-6.5 |
|
λ+6.5 |
nm |
2 |
|
Spectral Width (-20dB) |
σ |
|
|
1 |
nm |
|
|
Optical Extinction Ratio |
ER |
3.5 |
|
|
dB |
|
|
Transmitter and Dispersion Penalty |
TDP |
|
|
3.2 |
dB |
|
|
Side mode Suppression ratio |
SMSR |
30 |
|
|
dB |
|
|
RIN |
RIN |
|
|
-128 |
dB/Hz |
|
|
Output Eye Mask |
|
Compliant with IEEE 802.3ae |
|
|||
|
Receiver |
|
|
|
|
|
|
|
Receiver Sensitivity |
Psen |
|
|
-14.4 |
dBm |
3 |
|
Input Saturation Power (Overload) |
PSAT |
0.5 |
|
|
dBm |
|
|
Input Optical Wavelength |
λIN |
1270 |
|
1610 |
nm |
|
|
LOS -Assert Power |
PA |
|
|
-17 |
dBm |
|
|
LOS -Deassert Power |
PD |
-30 |
|
|
dBm |
|
|
LOS -Hysteresis |
PHys |
0.5 |
|
|
dB |
|
Notes:
1. Class 1 Laser Safety per FDA/CDRH and IEC-825-1 regulations.
2. λ”is:1270,1290,1310,1330,1350,1370,1390,1410,1430,1450, please the “product selection” .
3. Measured with a PRBS 231-1 test pattern, @10.325Gb/s, BER<10-12 .
Electrical Characteristics
|
Parameter |
Symbol |
Min |
Typ |
Max |
Unit |
Note |
|
Supply Voltage |
Vcc |
3.14 |
3.3 |
3.46 |
V |
|
|
Supply Current |
Icc |
|
|
350 |
mA |
|
|
Transmitter |
|
|
|
|
|
|
|
Input differential impedance |
Rin |
|
100 |
|
Ω |
1 |
|
Differential data input swing |
Vin,pp |
180 |
|
1200 |
mV |
|
|
Transmit Disable Voltage |
VD |
Vcc–1.3 |
|
Vcc |
V |
|
|
Transmit Enable Voltage |
VEN |
Vee |
|
Vee+ 0.8 |
V |
2 |
|
Transmit Disable Assert Time |
|
|
|
10 |
us |
|
|
Receiver |
|
|
|
|
|
|
|
Differential data output swing |
Vout,pp |
300 |
|
850 |
mV |
3 |
|
Data output rise time |
tr |
30 |
|
|
ps |
4 |
|
Data output fall time |
tf |
30 |
|
|
ps |
4 |
|
LOS Fault |
VLOS fault |
Vcc–1.3 |
|
VccHOST |
V |
5 |
|
LOS Normal |
VLOS norm |
Vee |
|
Vee+0.8 |
V |
5 |
|
Power Supply Rejection |
PSR |
100 |
|
|
mVpp |
6 |
Notes:
1. Connected directly to TX data input pins. AC coupled thereafter.
2. Or open circuit.
3. Input 100 ohms differential termination.
4. These are unfiltered 20-80% values
5. Loss Of Signal is LVTTL. Logic 0 indicates normal operation; logic 1 indicates no signal detected.
6. Receiver sensitivity is compliant with power supply sinusoidal modulation of 20 Hz to 1.5 MHz up to specified value applied through the recommended power supply filtering network.
Pin DeSCRJPTions
|
Pin |
Symbol |
Name/DeSCRJPTion |
Note |
|
1 |
VEET |
Transmitter Ground (Common with Receiver Ground) |
1 |
|
2 |
TFAULT |
Transmitter Fault. |
2 |
|
3 |
TDIS |
Transmitter Disable. Laser output disabled on high or open. |
3 |
|
4 |
SDA |
2-wire Serial Interface Data Line |
4 |
|
5 |
SCL |
2-wire Serial Interface Clock Line |
4 |
|
6 |
MOD_ABS |
Module Absent. Grounded within the module |
4 |
|
7 |
RS0 |
Rate Select 0 |
5 |
|
8 |
LOS |
Loss of Signal indication. Logic 0 indicates normal operation. |
6 |
|
9 |
RS1 |
No connection required |
1 |
|
10 |
VEER |
Receiver Ground (Common with Transmitter Ground) |
1 |
|
11 |
VEER |
Receiver Ground (Common with Transmitter Ground) |
1 |
|
12 |
RD- |
Receiver Inverted DATA out. AC Coupled |
|
|
13 |
RD+ |
Receiver Non-inverted DATA out. AC Coupled |
|
|
14 |
VEER |
Receiver Ground (Common with Transmitter Ground) |
1 |
|
15 |
VCCR |
Receiver Power Supply |
|
|
16 |
VCCT |
Transmitter Power Supply |
|
|
17 |
VEET |
Transmitter Ground (Common with Receiver Ground) |
1 |
|
18 |
TD+ |
Transmitter Non-Inverted DATA in. AC Coupled. |
|
|
19 |
TD- |
Transmitter Inverted DATA in. AC Coupled. |
|
|
20 |
VEET |
Transmitter Ground (Common with Receiver Ground) |
1 |
898995850
