该机器具有以下特点：
1、采用敞开料仓，可从一头进料，另一头出料的流水线式作业，克服了现有滚筒式剥皮机停电进料、出料，分段式工作方式的缺点工作效率高。，
2、由于齿牙对木段的冲击，不仅使木段在机壳内做循环运动，且绕自身回转，因此剥皮效率高。桉木扬木等难剥皮的树种有较好的剥净率。
3、对木材的适应性强，可对不同树种、直径、长度和形状的木段进行剥皮，由于木段做回转运动和不规则跳动，故弯曲木段的凹部也能与剥皮齿牙很好的接触。因此，对弯曲原木的剥净率比其他滚筒式高得多。
4、因庞大的机壳是固定不动的，所以耗能小，故障率低，维修工作量小，振动和噪声比滚筒剥皮机要低得多，机器落地即可生产，甚至无需底座安装，使用方便.
This machine has the following features:
1, the open bin, but from a head of feed, and the other a head of discharging assembly line type operation, overcome the existing roller peeling machine power feed and discharge, sectional work the disadvantages of high efficiency. ,
2, due to the impact of the teeth logs, not only make logs in casing inside do circular motion, and around their own rotary, so peeling high efficiency. Eucalyptus wood Yang wood difficult peeling species have good peel net rate.
3, on the wood adaptability is strong, can be on different species, diameter, length and shape of the logs for peeling, because logs do rotary motion and irregular beats, the bending logs valleys can also with peeling tooth tooth very good contact. Therefore, the bending of log off net rate than other roller much higher.
4, because of the huge casing is fixed, so little energy, low failure rate, maintenance workload is small, the vibration and noise ratio roller peeling confidential much lower, the machine can produce landing, even without base installation, easy to use.
柘城县鸿鑫机械设备厂是河南省晶鑫机械设备厂的下属企业，专业生产饲料颗粒机,饲料粉碎机，水产饲料膨化机，鱼食饲料机，大豆脱皮机，秸杆粉碎机，树枝粉碎机，圆木粉碎机，木炭粉碎机，锯末专用粉碎机，椰子粉碎机，制棒机，木炭机，烘干机，炭化炉，小型砌块砖机，砌块砖机，煤球机，炭粉成型机，压球机等产品，专业生产加工的私营独资企业,公司总部设在郑州,柘城县鸿鑫机械设备厂拥有完整、科学的质量管理体系。柘城县鸿鑫机械设备厂的诚信、实力和产品质量获得业界的认可。欢迎各界朋友莅临柘城县鸿鑫机械设备厂参观、指导和业务洽谈。
898995850
