武研/沧州高温导热油泵+13775024666常州市武研热油泵有限公司常州市武进武研WRY系列的高温热油泵采用自热散热结构，它改变了传统的水冷却结构，使结构简单，体积小，节约运行费用，性能好，使用可靠，是我国消化吸收国外油泵的基础上研制的第二代产品，基本结构形式为单级单吸悬臂式脚支撑结构，WRY系列的热油泵的进口为轴向吸入，出口为中心垂直向上，和电机同装于底座上。高温热油泵的支撑采用了双端球轴承支撑的结构形式，前端采用润滑油润滑，后端采用润滑脂润滑，中间有一导油管，用以随时观察密封情况和回收导热油。
Wujin Wu research radiating structure, it changes the conventional water cooling structure with wry series of high temperature heat pump, which has the advantages of simple structure, small volume, save the operating cost, good performance, reliable use is our digestion and absorption of foreign oil pump based on the development of the second generation product, forms the basic structure for single-stage single suction cantilever leg supporting structure, wry series hot oil pump inlet is axial suction, export center vertically upward, and motor mounted on the base. The heat pump is supported by the ball bearings at the both ends supported structure, front end lubricated by lubricating oil, back end lubricated by grease, in the middle of a guide pipe, to observe at any time and the recovery of conduction oil seal.
产品价格仅供参考如有疑问请与客服联系！
常州市武研热油泵有限公司
地 址：常州市武进区洛阳镇虞桥章家头50-1号（村委斜对面）
销 售：0519-89197180,0519-89197280
售 后：0519-89197580
传 真：0519-89197380
手 机：13775024666
Q Q: 876363125
邮 箱：WRY@vip.163.com
热油泵配件：www.wry006.com
WRY热油泵：www.wry002.com
WRY导热油泵：www.wry008.com
离心式热油泵：www.wry003.com
友情链接：武研热油泵 www.wyryb.com
2016.6.20韩
898995850
