包头液压升降机
1、检查液压升降机http://www.jnsjht.cn/的液压管和管道的连接部位，如果液压升降机的管道有破损的话应立即更换，坚持使用的话会减少使用寿命，连接部位有松动时拧紧管接头即可。
2、卸下并拆开液压升降机支撑阀，使支撑阀属于卸下的状态下，用压缩空气将阀芯吹干净之后再重新装上。
3、把液压升降机http://www.jnsjht.cn/邮箱中的液压油全部放完，并打开油箱取出吸油过滤器，吸净后放回油箱，按照原位安装，将油箱中重新注满新油即可。
济南亘安信息提供技术支持：http://www.jngenan.com/
Check hydraulic lift hydraulic pipes and pipe joints, hydraulic lifts if damaged pipes should be replaced immediately, then stick with the words will reduce the life of the connection part and tighten loose fittings can be.
Remove and disassemble the hydraulic lift valve support, the support valves are removed under state, followed by blowing compressed air to clean the valve and re-installed.
The hydraulic lift hydraulic oil mailbox fully discharged, and remove the oil filter open the tank, the tank back into the net after absorption, according to the in-situ installation, the tank can be refilled with new oil.
*您的姓名：
*联系手机：
固话电话：
E-mail:
所在单位：
需求数量：
*咨询内容:
898995850
