升降机厂家分析油箱选择方法

1、升降机厂家分析说首先要考虑其容量，一般移动式设备取泵最大流量的2～3倍，固定式设备取3～4倍，再就是要考虑油箱油位，当系统全部液压油缸伸出后油箱油面不得低于最低油位，当油缸回缩以后油面不得高于最高油位。
Lift manufacturers analysis that we must first consider its capacity, general mobile device to take two to three times the maximum pump flow rate, fixed equipment to take 3 to 4 times, then there are going to consider oil tank, when the system is extended all the hydraulic oil tank oil must not fall below the minimum oil level, when the cylinder is retracted after the oil shall not exceed the maximum oil level.

2、升降机厂家http://www.jnsjht.cn/建议要考虑油箱结构，传统油箱内的隔板并不能起沉淀脏物的作用，应沿油箱纵轴线安装一个垂直隔板，此隔板一端和油箱端板之间留有空位使隔板两边空间连通，液压泵的进出油口布置在不连通的一端隔板两侧，使进油和回油之间的距离最远，液压油箱多起一些散热作用。
Lift manufacturer recommends to consider the structure of the tank, separator tank and conventional precipitation dirt can not play the role of a vertical bulkhead should be installed along the longitudinal axis of the tank, leaving space between the end of the separator and the separator tank endplate connectivity on both sides of the space, the hydraulic pump oil inlet disposed at one end on both sides of the separator is not connected, so that the oil into the oil and return the distance between the farthest, hydraulic tank more than some cooling effect.

3、升降机厂家http://www.jnsjht.cn/提醒大家考虑散热的问题，有的液压升降机工作比较频繁所以就需要有更多的油来循环散热，要考虑使用性，一般要超出正常邮箱的2倍左右的容量，或者选用带冷却系统的整体液压升降机泵站。
Lift manufacturers remind you consider the heat problem, some hydraulic lifts to work more frequently so we need to have more oil to circulate the heat, to consider, generally about 2 times to exceed the capacity of a normal mailbox, or the choice with cooling system the overall hydraulic lift pump station.

济南亘安信息提供技术支持：http：//www.jngenan.com/