BYK420 BYK425 BYK428 BYK430
0.3-1.5 %添加剂（供应）以防止沉淀的总公式。
0.3-3 % additive (as supplied) based on the total formulation to prevent sagging.
0.3%添加剂（供应）基于总配方防止下垂。
The above recommended levels can be used for orientation. Optimal levels are determined through
上述建议的水平可用于定位。最佳水平的确定
a series of laboratory tests.
一系列的实验室测试。
Incorporation and Processing Instructions
注册和处理指令
Addition into the millbase ensures optimum distribution and therefore the best possible effectiveness and
添加到物料确保最佳的分布，因此最好的效果
reproducibility in applications. It is not necessary to speci?cally control the temperature or adjust the pH value.
重复性的应用。它不需要特殊地控制温度?或调整pH值。
The additive is suitable for adjusting the viscosity afterwards by incorporating it as a post-additive. If the
该添加剂适用于通过将它作为后添加剂事后调整粘度。如果
use as a post-additive causes the product to appear non-homogeneous, typical co-solvents can be used
作为后添加剂导致产品出现不均匀，典型的共溶剂可用于
to improve the homogeneity.
为了提高均匀性。
Special Note
特别注意
As the additive contains chloride ions, we recommend testing the corrosion properties of the
作为添加剂含有氯离子，我们建议测试的腐蚀性能
manufactured coatings for contact with metal and to store the coatings in plastic containers or
制造涂层与金属接触并存放在塑料容器或涂料
containers with interior coating to prevent corrosion in metal containers. In the cured coating,
内涂层的容器以防止金属容器的腐蚀。在固化涂层，
however, no negative impact on its corrosion protection has been found.
然而，在其腐蚀保护没有负面影响已经被发现。
*您的姓名：
*联系手机：
固话电话：
E-mail:
所在单位：
需求数量：
*咨询内容:
尚未认证，请谨慎交易
898995850
