水解稳定性PPE+PS PX0844
型号：PPE+PS PX0844

性能：通用级，PPE+PS混合，UL94 HB额定，低吸水率，水解稳定性，尺寸稳定性。

供应美国沙伯基PPE+PS 以下是部分牌号说明表！
聚苯醚+聚苯乙烯
混合了聚苯醚和聚苯乙烯与一系列的属性,包括冲击强度、良好的尺寸稳定性、耐热性、优良的美学,和加工性能。
Lubricomp LNP * *化合物
  Model型号  Characteristics 特性
Noryl_NF1520 20% glass reinforced, 15% PTFE. Wear resistant; 211F HDT @ 264 psi.
20%的玻璃纤维,15%聚四氟乙烯.耐磨;211 f热变形@ 264 psi。


Noryl_NWR5810 10% PTFE filled PPE+PS. High flow and good impact. Applications requiring wear resistance/lubricity. Electronics. 10% PTFE填充PPE + PS.高流量和良好的耐磨损.电子产品。


Noryl_SPN422L Wear resistant, fluorocarbon alloy, 235F (113C) HDT. UL94 HB rated. Check surface aesthetics prior to material . 耐磨、氟碳合金,235 f(113 c)HDT,UL94 HB额定,检查前表面美学材料规格。


ZFG26 Internally Lubricated PPE+PS Blend compound containing Glass Fiber, Graphite Powder. 在内部润滑PPE + PS混合化合物含有玻璃纤维、石墨粉。


ZFL31XXC Internally Lubricated PPE+PS Blend compound containing Glass Fiber, PTFE .在内部润滑PPE + PS混合化合物含有玻璃纤维、聚四氟乙烯。


ZFL34XXC Internally Lubricated PPE+PS Blend compound containing Glass Fiber, PTFE. 在内部润滑PPE + PS混合化合物含有玻璃纤维、聚四氟乙烯。


ZL003 Internally Lubricated PPE+PS Blend compound containing PTFE. 在内部润滑PPE + PS混合复合含聚四氟乙烯。


ZP001XXP Internally Lubricated PPE+PS Blend compound containing PTFE, Silicone. 在内部润滑PPE + PS混合化合物含有聚四氟乙烯、硅酮。


ZX05506 Internally Lubricated PPE+PS Blend compound containing Graphite Powder, PTFE.在内部润滑PPE + PS混合复合含石墨粉、聚四氟乙烯。


Lubriloy LNP * *化合物
 Model型号  Characteristics 特性
Z2000 Internally Lubricated PPE+PS Blend compound containing Proprietary Lubricant. 在内部润滑PPE + PS混合化合物包含专有的润滑剂。


LNP * stat今敏*化合物
 Model型号  Characteristics 特性
Noryl_FMC1010 10% carbon fiber, static dissipative, foamable resin Nonchlorinated, nonbrominated. UL94 V1 rated. Property values at 20% WR, 0.250" wall. 10%的碳纤维、静电耗散,发泡的树脂, UL94 V1额定。属性值在20% WR,0.250”墙。


Noryl_FMC3008A 30% carbon fiber/glass/mineral filled, static dissipative, foamable resin. UL94 V1 rated. Property values at 20% weight reduction, 0.250" wall.  30%的碳纤维/玻璃/矿物填充、静电耗散,发泡的树脂。 UL94 V1额定。属性值在20%减重,0.250“墙。


Noryl_HMC1010 10% Carbon fiber reinforced.Static dissipative.Nonbrominated, nonchlornated flame retardant system. UL94 V-1 rated. 10%的碳纤维增强。静态耗散。阻燃体系。UL94 V-1 rated.


Noryl_HMC202M DATA ON BK1005 ONLY.BK1005数据只。


Noryl_HMC3008A 30% glass/mineral/carbon fiber reinforced resin; static dissipative; 250F (120C) HDT.  30%玻璃/矿物/碳纤维增强树脂;静态耗散;250 f(120 c) HDT。


Noryl_NC2525 25% CFR PPE+PS. Highly conductive. High heat. May be added to similar material/regrind to add some conductivity to the blend.  25%的CFR PPE + PS.高导电.高热量.可添加到类似的材料/再磨研添加一些电导率的混合。


Thermocomp LNP * *化合物
 Model型号  Characteristics 特性
Noryl_FM3020 GR/MR 30%, high modulus structural foam. 10% weight reduction, 0.250" wall thickness. GR/MR 30%,高模量结构性泡沫.10%的减重,0.250“壁厚。


Noryl_FM4025 GR/MR 40%, high modulus structural foam. 10% weight reduction, 0.250" wall thickness.  GR/MR 40%, 高模量结构性泡沫.10%的减重,0.250“壁厚。


Noryl_HM3020 30% Glass/Mineral filled, high modulus grade. DTUL 248F (120C). UL94 V-1/5VA rated in black and gray.  30%玻璃/矿物填充、高模量等级. DTUL 248 f(120 c).UL94 V-1/5VA额定的黑色和灰色。


Noryl_HM4025 40% Glass/Mineral filled high modulus grade. DTUL 255F (124C). UL94 V-0/V-1/5VA rated in black and gray only (see thicknesses). 40%玻璃/矿物填充高模数等级.DTUL 255 f(124 c).UL94 v 0 / V-1/5VA额定在黑色和灰色只有(参见厚度)。


Noryl_PCN2910 35% Glass/Mica filled. High modulus and tight tolerance molding for the chassis market. 35%玻璃/云母填充.高模数和严格公差成型的底盘市场。


ZF-1006 BK8-950 PPE+PS Blend compound containing Glass Fiber. PPE + PS混合复合含玻璃纤维。


ZF004 PPE+PS Blend compound containing Glass Fiber. PPE + PS混合复合含玻璃纤维。


ZF0049 Flame Retardant PPE+PS Blend compound containing Flame Retardant.阻燃PPE + PS混合复合含阻燃剂。


ZF006 PPE+PS Blend compound containing Glass Fiber. PPE + PS混合复合含玻璃纤维。


ZF0089 Exceptional Processing, Flame Retardant PPE+PS Blend compound. 阻燃PPE + PS混合化合物。


ZFM62P Exceptional Processing, Low Warpage PPE+PS Blend compound containing Glass Fiber, Mineral. 低翘曲PPE + PS混合复合含玻璃纤维、矿物。


改性聚苯醚*树脂
 Model型号  Characteristics 特性
534 High heat, unreinforced.高热量,无筋。


731 PPE+PS blend. Unfilled. NSF listed for potable water use in several colors (Standard 61). FDA compliant (restrictions apply). UL94 HB rated. Low water absorption. Hydrolytic stability. Dimensional stability.  PPE + PS混合,空缺,NSF挂牌饮用水使用在一些颜色(标准61),FDA兼容(限制),UL94 HB额定,低吸水率,水解稳定性,尺寸稳定性。


BN31 Blowmoldable. Excellent processability and flammability. Good heat resistance. Low temperature impact strength. Dimensional stability. 优良的加工性能和自燃。良好的耐热性。低温冲击强度。尺寸稳定性。


EM6100 PPE+PS blend. Unfilled. Good balance of flow/heat/impact. Dimensional stability. Paint adhesion. Suitable for the automotive interior market: HVAC housings, radio components. PPE + PS混合,空缺,良好的平衡的流/热/影响,尺寸稳定性,漆附着力。适用于汽车内部市场:暖通空调外壳、广播组件。


EM6101 Automotive interiors. Improved flow characteristics/overall processing economy. 250F DTUL. Good property retention/wide temperature range. 汽车内饰,改善流动特性/整体处理经济.250 f DTUL,好的属性保留/宽温度范围。


EM7100 Automotive interiors. 200F DTUL. Excellent processability/economy. Good impact/mechanicals vs styrenics. Trim/instrument panel components. 汽车内饰. 200 f DTUL. 优良的加工性/经济. 好的影响/工业制品与苯乙烯类产品.修剪/仪器面板组件。


EM7301F 10% glass-reinforced. HDT 252F. Good flow and polyurethane foam adhesion. Black only. 10%玻璃增强,HDT 252F. 好流和聚氨酯泡沫附着力.只有黑。


EM7304F 15% glass reinforced, high flow with enhanced polyurethane foam adhesion for instrument panel retainers. 15%的玻璃纤维,高流量与增强聚氨酯泡沫附着力对仪表面板固定器。


EM7430 30% glass reinforced, high flow PPO.Automotive.Energy management material  30%的玻璃纤维,高流量多酚氧化酶(PPO). 汽车.能源管理材料。


EN185 Extrusion grade，Excellent impact strength，185F (85C) DTUL，UL94 V-1 rated。. 挤压等级. 优秀的冲击强度. 


EN212 Extrusion grade.212F (100C) DTUL. UL94 V-1 rated. 挤压等级..


EN265 Extrusion grade.254F (123C) DTUL.UL94 V-1 rated. 挤压等级..


ENG265 PPE+PS blend. Unfilled. Suitable for profile extrusion. NSF listed for potable water use in several colors (Standard 61). Low water absorption. Hydrolytic stability. Dimensional stability. Typical applications include tubes for reverse osmo  PPE + PS混合. 空缺. 适合型材挤压NSF挂牌饮用水使用在一些颜色(标准61). 低吸水率. 水解稳定性. 尺寸稳定性.典型的应用包括管为反向osmo


EXNL0143 PPE+PS, Translucent, extrusion and blow molding. PPE + PS,半透明、挤出、吹塑。


EXNL0357 PPE+PS, Flame Retardant, UL Grade, Non-Halogen Flame Retaardant, Flame retardant, PPE + PS、阻燃、UL级阻燃火焰Retaardant、阻燃、


EZ250 Automotive wheel covers. Offers superior processability/flow and better chemical resistance when exposed to many automotive fluids over PX0844. 汽车轮覆盖.提供优越的加工性能/流和更好的耐化学性暴露在许多汽车流体在PX0844。


FE8000S PPE+PS, FDA Compliant Raw Materials, Impact Modified, Opaque.  PPE + PS,FDA兼容的原料,影响修改,不透明的,


FN150X Improved reliability and productivity. Thin wall capability. UL94 V-0/5VA rated. All data at 20% weight reduction and 0.250" wall. 提高可靠性和生产力. 薄壁能力. UL94 V-0/5VA额定.所有数据在20%减重和0.250“wall。


FN170X Foamable resin. All properties at 10% density reduction; 0.250" thick test specimens. 发泡的树脂.所有属性在10%密度减少;0.250英寸厚的试样。


FN215X Structural foam resin. 170F (77C) HDT. Improved reliability and productivity. All values at 20% weight reduction. 结构性泡沫树脂.170F (77C) HDT. 提高可靠性和生产力.所有值在20%减重。


FP6130 PPE+PS, Flame Retardant, non-chlorinated, non-brominated , UL94 V-1 @ 1.5 mm, Vicat ISO 306 B/120 of 114 deg C, GWFI of 960 deg C。 PPE + PS,阻燃,未经氯化处理过的空洞中,非溴化,它们UL94 @ 1.5毫米,维卡软化点ISO 306 B / 120 114摄氏度,GWFI 960摄氏度


GFN1 PPE+PS blend. 10% Glass reinforced. NSF 61 listing in several colors (restrictions apply). FDA compliance (restrictions apply). Low water absorption. Hydrolytic stability. Dimensional stability. Suitable for fluid engineering applications i  PPE + PS混合. 10%的玻璃纤维. 清单在一些颜色NSF 61(限制). FDA合规(限制). 低吸水率. 水解稳定性. 尺寸稳定性.适用于流体工程应用


GFN1420V PPE+PS, 20% Glass, FDA Compliant Raw Materials, High Flow, Opaque, PPE + PS,20%玻璃,FDA兼容的原材料、高流,不透明的,


GFN1430V PPE+PS, 30% Glass Reinforced, Hydrolytic stability, Potable Water Compatible, Improved Processability.  PPE + PS,30%玻璃增强,水解稳定性、饮用水兼容,改进的加工性能


GFN1740V PPE+PS, 40% Glass Reinforced, Hydrolytic stability, Potable Water Compatible, ISO306 Vicat B/120 of 161C, ISO527 Tensile Modulus of 11300 MPa.  PPE + PS,40%玻璃增强,水解稳定性、饮用水兼容,ISO306维卡软化点B / 120 161 c,ISO527 11300 MPa的拉伸模量


GFN2 PPE+PS blend. 20% Glass reinforced. UL746C F1. NSF 61 listing in several colors (restrictions apply). FDA compliance (restrictions apply). Low water absorption. Hydrolytic stability. Dimensional stability. Suitable for fluid engineering app  PPE + PS混合. 20%的玻璃纤维. UL746C F1.清单在一些颜色NSF 61(限制). FDA合规(限制). 低吸水率.解稳定性. 尺寸稳定性.适用于流体工程应用


GFN3 PPE+PS blend. 30% Glass reinforced. NSF 61 listing in several colors (restrictions apply). FDA compliance (restrictions apply). Low water absorption. Hydrolytic stability. Dimensional stability. Suitable for fluid engineering applications i.  PPE + PS混合. 30%的玻璃纤维.清单在一些颜色NSF 61(限制). FDA合规(限制). 低吸水率 水解稳定性. 尺寸稳定性.适用于流体工程应用我


HH180 PPE+PS, High heat (Vicat B/120 = 185°C) .  PPE + PS、高热量(维卡软化点B / 120 = 185°C)


HN731A PPE+PS blend. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO 10993 or USP Class VI), food contact compliant (restrictions apply). Combines good hydrolytic stability and dimensiona. PPE + PS混合. 医疗设备和制药应用程序. 医疗管理的变化,不会引起排斥(ISO 10993或USP VI类)、食品接触兼容(限制).结合了好的水解稳定性和dimensiona


HS1000X PPE+PS blend. 13% Mineral reinforced. Non-brominated, non-chlorinated FR system. UL94 V0 and 5VA listing. UL 746C f1. Radiant Panel listing. Dielectric strength. Dimensional stability. Suitable for E/E applications.  PPE + PS混合. 13%的矿物增强. 非溴化,未经氯化处理过的空洞中FR系统。UL94 V0 and 5VA listing. UL 746 c f1. 辐射板清单. 绝缘强度. 尺寸稳定性.适合E / E的应用程序。


HS2000X PPE+PS blend. 17% Mineral reinforced. Non-brominated, non-chlorinated FR system. UL94 V0 and 5VA listing. UL 746C f1. Radiant panel listing. Dielectric strength. Dimensional stability. Suitable for E/E applications. PPE + PS混合.17%的矿物增强.非溴化,未经氯化处理过的空洞中FR系统.UL94 V0 and 5VA listing.UL 746 c f1.辐射板清单.绝缘强度.尺寸稳定性.适合E / E的应用程序。


IGN320 20% glass reinforced PPE + PS. High heat, high modulus automotive applications like ignition coils.  20%玻璃增强PPE + PS.高热量,高模数汽车点火线圈等应用程序。


IGN5531 PPE+PS, Glass, PPE + PS,玻璃,


LTA1350 PPE+PS, Flame Retardant, Nonhalogenated, UL94 V-0 at 1.0 mm。 PPE + PS、阻燃、Nonhalogenated,UL94 v 0在1.0毫米


LTA5020 PPE+PS, Flame Retardant, UL Grade, Flame retardant, Nonhalogenated。PPE + PS、阻燃、UL品位、阻燃、Nonhalogenated,


MX5569 PPE+PS blend. High Heat. Good balance of Flow and Impact. Offers good aging performance under heat. Typical applications include Automotive Interiors and Lighting.  PPE + PS混合. 高热量. 良好的平衡的流和影响. 提供良好的??化性能在热.典型的应用包括汽车内饰和照明。


N1150 Noryl* Resin N1150 改性聚苯醚树脂N1150 *


N190X PPE+PS blend. Unfilled. Non-brominated, non-chlorinated FR system. UL94 V0/5VA rated. RTI Elec/Imp/Str 95/80/95. Dielectric strength. Suitable for E/E market applications.  PPE + PS混合.空缺. 非溴化,未经氯化处理过的空洞中FR系统. UL94 V0/5VA额定.RTI Elec/Imp/Str 95/80/95.绝缘强度.适合E / E市场应用程序。


N225X PPE+PS blend. Unfilled. Halogen-Free FR performance. UL94 V0/5VA. UL746C F1. Dielectric Strength. Suitable for E/E market indoor/outdoor applications. PPE + PS混合. 空缺. 无卤环保型FR性能. UL94 V0/5VA. UL746C F1. 绝缘强度.适合E / E室内/室外的应用程序市场。


N300X PPE+PS blend. Unfilled. Non-brominated, non-chlorinated FR system. UL94 V0. High heat. Dielectric strength. Dimensional stability. Suitable for E/E applications. PPE + PS混合. 空缺. 非溴化,未经氯化处理过的空洞中FR系统. UL94 V0. 高热量. 绝缘强度. 尺寸稳定性.适合E / E的应用程序。


N750 ECO-FLO(tm). ECO conforming, nonhalogenated flame retardant PPE+PS. High flow. Electrical, TV and Business Equipment applications.  PPE+PS. ECO符合，nonhalogenated阻燃PPE + PS. 高流量.电、电视和商业设备的应用程序。


N850 ECO-FLO(tm). ECO conforming, nonhalogenated flame retardant PPE+PS. High flow. Electrical and Business Equipment applications.  PPE+PS. ECO符合，nonhalogenated阻燃PPE + PS。高流量.电和商业设备的应用程序。


NH5020 PPE+PS, Flame Retarded，PPE + PS,阻燃


NH5120 PPE+PS, Flame Retardant, Flame retardant，PPE + PS、阻燃剂、阻燃、


NH5120C PPE+PS, Flame Retardant, Flame retardant，PPE + PS、阻燃剂、阻燃、


NH7010 PPE+PS, Flame Retardant, Nonhalogenated，PPE + PS、阻燃、Nonhalogenated,


PKN4752 PPE+PS blend. High Heat. Translucent with yellow tint in natural color. FDA compliant. Extrusion and Injection Molding. Typical applications include High Performance Food Packaging, Electronics and Healthcare Packaging. PPE + PS混合，高热量. 半透明的黄色色调自然色. FDA兼容. 挤出和注塑成型.典型的应用包括高性能食品包装、电子、医疗包装。


PKN4775 PPE+PS. PPE + PS。Improved version of PKN4736.PKN4736的改进版。


PN235 Plating grade, primarily automotive applications. 电镀级,主要是汽车上的应用。


PN275 PPE+PS with low mineral loading.High heat, platable applications.  PPE + PS与低矿物加载.高热量,可电镀应用程序。


PN275F PPE+PS with low mineral loading. High heat, platable applications. NSF approved for water contact applications。 PPE + PS与低矿物加载高热量,可电镀应用程序.NSF应用程序获得批准的水接触。


PX0844 PPE+PS blend.Unfilled. UL94 HB rated.Low water absorption.Hydrolytic stability. Dimensional stability。 PPE + PS混合.空缺. UL94 HB额定.低吸水率.水解稳定性.尺寸稳定性。


PX0888 Unfilled, non-FR. Higher heat resistance than N110 (BOZ) and px0844 (USA). For automotive interiors. 250F (121C) DTUL. 高耐热性比N110(博兹)和px0844(美国). 汽车内饰.250 f(121 c)DTUL。


PX1005X PPE+PS blend. Non-brominated, non-chlorinated FR system. UL94 V0/5VA rated. UL746C F1. Excelent Dielectric Strength. Suitable for E/E market in indoor/outdoor applications.  PPE + PS混合.非溴化,未经氯化处理过的空洞中FR系统.UL94 V0/5VA额定.UL746C F1.出色的绝缘强度.适合E / E市场在室内/室外的应用程序。


PX1007 PPE+PS, Flame Retardant, PPE + PS,阻燃,


PX1127 Automotive electrical applications.250F (120C) HDT.  汽车电气应用程序.250F (120C) HDT.


PX1265 Automotive applications. Exterior mirror and cluster housings, speaker grilles, cowl tops, exterior trim.270F (132C) DTUL.  汽车上的应用.外后视镜和集群外壳,扬声器格栅,蒙头斗篷上衣、外饰.270 f(132 c)DTUL。


PX1278 Automotive. Passes FMVSS 302. Heat resistance of 130 C (266 F).  主要挤压材料. 汽车. 通过FMVSS 302.热电阻的130 C(266 F)。


PX1390 Automotive applications, primarily. Excellent electrical properties, easy processability, high heat, 295F (146C) DTUL.  汽车上的应用,主要是.良好的电气性能,易加工性能、高热量,295 f(146 c)DTUL。


PX1391 PPE+PS blend. Unfilled. High heat. Dielectric strength. Dimensional stability. Suitable for E/E applications.  PPE + PS混合. 空缺. 高热量. 绝缘强度. 尺寸稳定性.适合E / E的应用程序。


PX1543 NANA


PX1736 PPE+PS, Translucent, extrusion and blow molding.  PPE + PS,半透明、挤出、吹塑。


PX2060 PPE+PS, Flame Retardant, Impact Modifier, Heat Stabilized, High Flow, Impact Modified, Non-Brominated & Non-Chlorinated Flame Retardant, Non-Halogen Flame Retaardant, UL Grade。 PPE + PS、阻燃、冲击改性剂、热稳定、高流、冲击改性、非溴化阻燃剂、阻燃及未经氯化处理过的空洞中火焰Retaardant,UL品位,


PX4605 PPE+PS blend. 20% Glass reinforced. High heat. Dimensional stability. Suitable for automotive and E/E applications.  PPE + PS混合. 20%的??璃纤维. 高热量. 尺寸稳定性.适用于汽车和E / E的应用程序。


PX5558 30% glass reinforced, high flow PPO. 30%的玻璃纤维,高流量多酚氧化酶(PPO)。


PX5622 PPE+PS blend. Halogen-Free FR performance. Good flow and surface aesthetics. UL94 V0/5VA/5VB. RTI Elec/Imp/Str 65. Suitable for E/E market indoor/outdoor applications.  PPE + PS混合. 无卤环保型FR性能.好流和表面美学UL94 V0/5VA / 5 vb.RTI Elec/Imp/Str 65.适合E / E室内/???外的应用程序市场。


PX6120 PPE+PS,PPE + PS,


PX9406 Nonbrominated, nonchlorinated, flame retarded. Improved productivity and reliability. 252F HDT. UL94 V-0 rated. Electrical applications.  阻燃. 改进生产力和可靠性. 252 f热变形. UL94 v 0额定.电气应用程序。


RN0401 PPE+PS, Flame Retardant, UL Grade, PPE + PS、阻燃、UL品位,


SE100HX Improved productivity and reliability. 改进生产力和可靠性。


SE100X PPE+PS blend. Unfilled. Halogen-Free FR performance. UL94 V0/V1 rated. RTI Elec/Imp/Str 95/80/95. Good flow. Suitable for E/E market indoor/outdoor applications.  PPE + PS混合. 空缺. 无卤环保型FR性能. UL94 V0 / V1额定.RTI Elec/Imp/Str 95/80/95. 好流.适合E / E室内/室外的应用程序市场。


SE1GFN1 PPE+PS blend. 10% Glass reinforced. Non-brominated, non-chlorinated FR system. UL94 V1 listing. RTI 110/105/110. Dielectric strength. Dimensional stability. Suitable for E/E applications.  PPE + PS混合. 10%的玻璃纤维. 非溴化,未经氯化处理过的空洞中FR系统. UL94 V1清单. 110/105/110 RTI.绝缘强度. 尺寸稳定性.适合E / E的应用程序。


SE1GFN2 PPE+PS blend. 20% Glass reinforced. Non-brominated, non-chlorinated FR system. UL94 V1 and 5VA listing. RTI 110/105/110. Dielectric strength. Dimensional stability. Suitable for E/E applications.  PPE + PS混合. 20%的玻璃纤维. 非溴化,未经氯化处理过的空洞中FR系统。UL94 V1 and 5VA listing.110/105/110 RTI. 绝缘强度. 尺寸稳定性.适合E / E的应用程序。


SE1GFN3 PPE+PS blend. 30% Glass reinforced. Non-brominated, non-chlorinated FR system. UL94 V1 listing. RTI 110/105/110. Dielectric strength. Dimensional stability. Suitable for E/E applications.  PPE + PS混合. 30%的玻璃纤维. 非溴化,未经氯化处理过的空洞中FR系统。UL94 V1 listing.110/105/110 RTI. 绝缘强度. 尺寸稳定性.适合E / E的应用程序。


SE1X PPE+PS blend. Unfilled. Non-brominated, non-chlorinated FR system. UL94 V1, UL746C F1. Dielectric strength. Suitable for E/E market indoor/outdoor applications. PPE + PS混合. 空缺. 非溴化,未经氯化处理过的空洞中FR系统. UL94 V1,UL746C F1. 绝缘强度.适合E / E室内/室外的应用程序???场。


SPN410 Improved productivity. 210F (99C) DTUL. UL94 HB rated. 提高生产率. 210 f(99 c)DTUL.UL94 HB额定。


SPN420 Superior Productivity plus heat and impact resistance.Excellent processability. 先进的生产力加热量和抗冲击性.优良的加工性能。


STN15HF Automotive interiors. Improved flow characteristics/overall processing economy. 240F DTUL. High impact/good property retention after heat ageing. 汽车内饰. 改善流动特性/整体处理经济. 240 f DTUL.高影响/性能良好的热老化后保留。


TN300 PPE+PS.Transparent.High heat.Color Limited.Injection molding. Laser-Transmission welding applications. PPE + PS. 透明. 高热量. 颜色有限. 注射成型.激光透射焊接的应用程序。


Prevex *树脂
 Model型号  Characteristics 特性
VGAX Improved productivity and reliability. Nonchlorinated, nonbrominated flame retardant. 180F HDT. 改进生产力和可靠性. Nonchlorinated,nonbrominated阻燃剂.180 f热变形。


W20 Automotive. PPE alloy. High flow/impact. Instrument panels and interior trim components. HDT 210F.  汽车. PPE合金. 高流/影响. 仪器面板和内饰部件.HDT 210F.


   PPO改性的用途 




1、适于制作耐热件、绝缘件、减磨耐磨件、传动件、医疗及电子零件。
2、可作较高温度下使用的齿轮、风叶、阀等零件，可代替不锈钢使用。
3、可制作螺丝、紧固件及连接件。
4、电机、转子、机壳、变压器的电器零件。
5、PPO和MPPO 主要用于电子电器、汽车、家用电器、办公室设备和工业机械等方面，利用MPPO耐热性、耐冲击性、尺寸稳定性、耐擦伤、耐剥落。
6、可涂性和电气性能，用于做汽车仪表板、散热器格子、扬声器格栅、控制台、保险盒、继电器箱、连接器、轮罩。
7、电子电器工业上广泛用于制造连接器、线圈绕线轴、机械部件护罩、开关继电器、调谐设备、大型电子显示器、可变电容器、蓄电池配件、话筒等零部件。
8、家用电器上用于电视机、摄影机、录象带、录音机、空调机、加温器、电饭煲等零部件。可作复印机、计算机系统，打印机、传真机等外装件和组件。
9、另外可做照相机、计时器、水泵、鼓风机的外壳和零部件、无声齿轮、管道、阀体、外科手术器具、消毒器等医疗器具零部件。
10、大型吹塑成型可做汽车大型部件如阻流板、保险杠、低发泡成型适宜制作高刚性、尺寸稳定性、优良吸音性、内部结构复杂的大型制品，如各种机器外壳、底座、内部支架、设计自由度大，制品轻量化


未经改性的聚苯醚（PPO）树脂具有良好的力学性能、电性能、耐热性、阻燃性以及化学稳定性等，但是它的耐溶剂性差、制品容易发生应力开裂、缺口冲击强度低，另外它存在一个致命的弱点——熔体粘度高，加工成型性极差，纯PPO树脂不能采用注射方法成型，这样大大限制了它的应用。
 PPO的改性基本知识   
       未经改性的聚苯醚（PPO）树脂具有良好的力学性能、电性能、耐热性、阻燃性以及化学稳定性等，但是它的耐溶剂性差、制品容易发生应力开裂、缺口冲击强度低，另外它存在一个致命的弱点——熔体粘度高，加工成型性极差，纯PPO树脂不能采用注射方法成型，这样大大限制了它的应用。
为了克服这些缺点，或赋予其新的性能，人们对PPO进行了多种改性。其方法有化学（共聚、嵌段、接枝和网化等）和物理（共混、填充、增强和微发泡等）改性两种。