杭州辊筒油加热器，杭州反应釜油加热器，杭州硫化机油加热器

导热油加热器 油加热控温机 电加热导热油炉 大型热油温控设备 油温机 运油式模温机

油加热控温机，运油式模温机，运油机的优点是控温范围大，热确定性好，但需发媒介成本，有油污，热传导效率不如水温机，我们最新研制的机型，采用进口的板式热交换器，具有结构紧凑，升降温速度快，控温精确的优点。我司油温机温控可达350℃
油加热器特点:
1、最高使用温度350℃
2、微电脑触摸式控制操作简单
3、自动开机排气
4、自动冷却关机
5、出油、回油温度显示
6、模具回水功能（选购）
7、OMRON、FUJI、TE控制零件
8、不锈钢管路，减少管阻及锈垢
9、故障显示，维修不用专业人员

油温加热器安全保护及指示系统
1、电源欠相保护
2、总漏电保护开关
3、泵反转保护及指示灯
4、泵过载保护及指示灯
5、过热保护及指示灯
7、热油BY-PASS洩压回路
8、温度异常警报及指示灯
9、异常警报蜂鸣器
10、缺油保护及指示灯

主要使用的行业为：压铸模具加热，玻璃钢（SMC）模具加热，辊轮/辊筒加热控温，热压机压板加热，万能液压机平板加热，反应釜夹套加热控温，电加热导热油炉是以电能为热源，导热油为热载体，利用高温泵强制液相循环，将热能输送到用热设备上加热后，继而又回到加热装置中重新加热的直流式特种设备。

The heat conduction oil heater oil heating machine electric heating temperature control device of large heat conducting oil furnace oil temperature machine oil type mold temperature machine

Oil temperature control heating machine, the transport type mold temperature machine oil, oil machine has the advantages of is large temperature range, good thermal deterministic, but media cost, oil, heat conduction efficiency than water temperature machine, we newly developed models by imports of plate heat exchanger, has compact structure, fast speed of temperature fluctuation, precise temperature control advantages. Our oil machine temperature reaches 350 deg.

Oil heater features:

1, the highest temperature 350

2, microcomputer touch control operation is simple

3, automatic starting exhaust

4, automatic cooling off

5. The temperature of oil and oil return show.

6, mold backwater function (optional)

7, OMRON, FUJI, TE control parts

8, stainless steel piping, reducing pipe resistance and rust scale

9, the failure shows that maintenance without professional personnel

Oil heater safety protection and indicator system

1, power supply is under phase protection

2, total leakage protection switch

3, pump reverse protection and indicator

4, pump overload protection and indicator

5. Overheat protection and indicator

7, the oil pressure relief loop BY-PASS

8, temperature abnormal alarm and indicator

9, abnormal alarm buzzer

10, lack of oil protection and light

The main use of the industry: die casting mould heating, glass steel (SMC) mold heating, and wheel / roller heating and temperature controlling, hot press platens are heated, hydraulic universal machine, flat heating, reactor jacket heating temperature control, electric heating heat-conducting oil furnace is in electrical energy as heat source, heat conducting oil as heat carrier, the use of high temperature pump forces the liquid circulation, heat is delivered to the heating devices for heating, and then returned to the heating device re heating of the DC special equipment.