沧灿郑5IK90GU-SW东方马达
沧灿郑5IK90GU-SW东方马达
奥地利Kraus&Naimer KG64 T103/01 E
奥地利Kraus&Naimer KG64 T205/04 E 
奥地利Kraus&Naimer KG64 T303 VE2 
奥地利Kraus&Naimer KG64 T303 VE2C 
奥地利Kraus&Naimer KG64 T303/58 VE2 
奥地利Kraus&Naimer KG64B T103/01 E 
奥地利Kraus&Naimer KG64B T103/04 E 
奥地利Kraus&Naimer KG64B T103/09 VE 
奥地利Kraus&Naimer KG64B T103/12 VE 
奥地利Kraus&Naimer KG64B T103/17 E 
奥地利Kraus&Naimer KG64B T103/20 E 
奥地利Kraus&Naimer KG64B T103/25 VE 
奥地利Kraus&Naimer KG64B T103/28 VE 
奥地利Kraus&Naimer KG64B T103/D-A079 GKM 
奥地利Kraus&Naimer KG64B T104/01 E 
奥地利Kraus&Naimer KG64B T104/04 E 
奥地利Kraus&Naimer KG64B T104/09 VE 
奥地利Kraus&Naimer KG64B T104/12 VE 
奥地利Kraus&Naimer KG64B T105/01 E 
奥地利Kraus&Naimer KG64B T105/04 E 
KRAUS&NAIMER产品：
奥地利KRAUS&NAIMER开关、
KRAUS&NAIMER钮子开关、
KRAUS&NAIMER转换开关、
KRAUS&NAIMER选择开关、
KRAUS&NAIMER控制开关、
KRAUS&NAIMER限位开关、
KRAUS&NAIMER开关、
KRAUS&NAIMER凸轮开关。
 
奥地利（K&N）开关系列型号：
一.C，CA，，CAD，CH，系列开关10A-315A，L开关350－2400A.C开关为一般应用而设计，建议用于仪表，隔离器和马达控制；L开关为通，断负载而设计的，通常用于阻性负载或低感性负载。
型号：CA4，CA4-1，CA10，CA11，CA20，CA25，CAD11，CAD12，CA10B，CA11B，CA20B，CA25B，C26，C32，C42，C43，C80，C125，L350，L351，L630，L631，L1000，L1001，L1250，L1251，C315，C316，L400，L600，L800，L1200，L1600，L2000.
 
二.A和AD系列开关6A-40A.A开关每层有4对触点，这些开关有各种不同的功能，且只需很短的安装深度，可达36个开关位置，每个开关柱12层有48对触点。
型号：AD11，AD12，A11，A14，A11C，A14C，A30.
 
三.主开关和急停开关25A-1250A；维修开关25A-250A；隔离开关25A-315A；
型号：KG10，KG10A，KG10B，KH16，KH16B，KG20，KG20A，KG20B，KH20，KH20B，KG32，KG32A，KG32B，KH32，KG41，KG41B，KH40，KG64，KG64B，KH63，KG80，KG80C，KH80，KG100，KG100C，KG125，KG160，KG210，KG250，KG315，C316.
 
四.CG开关10A-25A.CG开关紧凑小巧，适用于控制及仪表应用，CG系列开关的接点依照VDE0106，第100部分的标准，设计成“护指”，接点容易接线及取出，CG4开关的触点均为镀金，故特别适合电子线路以及有化学腐蚀性的环境中。
型号：CG4，CG4-1，CG6，CG7，CG8，CG9，CG10，CG11，CG12，CG16，CH10B，CH16B，CHR10B，CHR16B.
 
五.D系列开关，至25A.
常见型号： CG4 CG4-1 CA10 CA10B CA11 CA11B CA20 CA20B CH10 CH20 CH11 C26 C32 C42 C43 C80 C125 C316 C315 L350 L351 L400 L600 L630 L631 L800 L1000 L1001 L1200 L1250 L1251 L1600 L2000 CAD11 CAD12 KG10B KG20B KG32B KG41B KG64B KG80 KG80C KG100 KG100C KG10A KG20A KG32A

The C-Series switches represent the classic cam switch by Kraus & Naimer. With specific models for all current ratings they offer an ideal solution for a wide variety of applications. The CA-Series with fingerproof terminals from 10 A to 32 A is ideally suited for many standard applications where industrial controls, instrumentation and electric motors are involved. For low-voltage applications down to switching of electronic signals the CA4 and CA4-1 are offered. The CA4-1 has gold-plated contacts and guarantees reliable switching, even under adverse, aggressive environmental conditions. Fingerproof terminals, accessible either horizontally or vertically, captive plus-minus screws and integrated screwdriver guides designed for the use of motorized screwdrivers are some clear practical advantages of the CA-Series. Insulation stripping or preparation of the conductor is no longer required if switches of the CL-Series with Insulation Displacement Connection (IDC) are used. The time required for loosening the terminal screws, stripping, preparing of the conductors and tightening of the terminal screws again can be saved. The terminals of this switch series are stainless and acid resistant. The switches of the L-Series from 350 A to 2400 A are continuous current rated for off-load switching. They are designed for switching of resistive or low-inductive loads. The C-, CA-, CAD-series provide screwdriver access from the side. Basically the C-, CA-, CAD-series are designed for vertical wiring. Horizontal wiring is available for mountings E, EF, E22, FS., FT., VE, VE22, VF, VF22. See Mounting Diagrams for details. CA10 4-pole ON/OFF-switch L350 1-pole ON/OFF-switch Declaration of Conformity CA4-C318 CA40-CA63 CAD11-CAD12B CH11-CHR12R CL4, CL10 L350-L1251 (size S2) L400-L1200 (size S3) L1600, L2000 Switch disconnectors: CA10-C318 L400, L600