Power and control cables in cold-resistant version, not spreading combustion, including in fire-resistant version, used for transmission and distribution of power energy in cold climate during construction and repairs of oil-gas and mining industry facilities at a temperature from minus 60 to plus 50 °С with possibility of cable laying without preheating to minus 45 °С and without limitation of levels along the laying route. 14.1. Power cables are intended for operation in stationary installations at AC voltage 0.66 and 1.0 kV and frequency up to 50 Hz in cold climate.

 Power cables may be used in DC voltage power grids at the values 2.4 times higher than respective AC voltage. 14.2. 

Control cables are intended to fix connection to electric appliances, devices, terminal blocks of electric switchgears with nominal voltage up to 0.66 kV and frequency up to 100 Hz or DC voltage up to 1.0 kV in cold climat

Brands of power cables:
KRIOSIL PTPGng(A)-FRHF-HL, KRIOSIL PtPGEng(A)-FRHF-HL,
KRIOSIL PtPGng(A)-HF-HL, KRIOSIL PtPGEng(A)-HF-HL,
KRIOSIL Pt
BPng(A)-HF-HL, KRIOSIL Pt
BPng(A)-FRHF-HL,
KRIOSIL VVGng(A)-FRLS-HL, KRIOSIL VVGEng(A)-FRLS-HL,
KRIOSIL VVGng(A)-LS-HL, KRIOSIL VVGEng(A)-LS-HL,
KRIOSIL VBSHvng(A)-FRLS-HL, KRIOSIL VBSHvng(A)-LS-HL,
KRIOSIL RvRng(A)-FRHF-HL, KRIOSIL Rv
BPng(A)-FRHF-HL,
KRIOSIL RvKPng(A)-FRHF-HL, KRIOSIL RvRng(A)-HF-HL,
KRIOSIL Rv
BPng(A)-HF-HL, KRIOSIL RvKPng(A)-HF-HL,
KRIOSIL PtPGng(A)-HL, KRIOSIL Pt
BPng(A)-HL,
KRIOSIL VVGng(A)-HL, KRIOSIL VVGE)-HL,
KRIOSIL VBSHvng(A)-HL, KRIOSIL APtPGng(A)-HF-HL,
KRIOSIL APt
BPng(A)-HF-HL, KRIOSIL AVVGng(A)-LS-HL,
KRIOSIL AVBSHvng(A)-LS-HL, KRIOSIL ARvPng(A)-HF-HL,
KRIOSIL ARv
BPng(A)-HF-HL, KRIOSIL ARvKPng(A)-HF-HL,
KRIOSIL APtP
Bng(A)-HL, KRIOSIL APtP
Bng(A)-HL,
KRIOSIL AVVGng(A)-HL, KRIOSIL AVBSHvng(A)-HL
KRIOSIL KPtPGng(A)-FRHF-HL, KRIOSIL KPtPGEng(A)-FRHF-HL,
KRIOSIL KPt
BPng(A)-FRHF-HL, KRIOSIL KPtPGng(A)-HF-HL,
KRIOSIL KPtPGEng(A)-HF-HL, KRIOSIL KPt
BPng(A)-HF-HL,
KRIOSIL KVVGng(A)-FRLS-HL, KRIOSIL KVVGEng(A)-FRLS-HL,
KRIOSIL KVBSHvng(A)-FRLS-HL, KRIOSIL KVVGng(A)-LS-HL,
KRIOSIL KVVGEng(A)-LS-HL, KRIOSIL KVBSHvng(A)-LS-HL,
KRIOSIL KPtPGng(A)-HL, KRIOSIL KPtPGEng(A)-HL,
KRIOSIL KPt
BPng(A)-HL, KRIOSIL KVVGng(A)-HL,
KRIOSIL KVVGEng(A)-HL, KRIOSIL KVBSHvng(A)-HL
Nominal voltage 0.66 and 1.0 k V

Nominal cross-section area of currentcarrying conductor Power cables 0.66 k V 1.5–50 mm 2 . Power cables 1 kV: 1.5–240 mm 2 (2–5 cores), 1.5–400 mm 2 (3–4 cores), 1.5–800 mm 2 (1 core). Control cables 0.66 kV: 1.0–2.5 mm 2 (4–52 cores)

Cable conductor continuous heating temperature From thermoplastic and P VC comPOSTTTIONs not more than 70 °С more than 70 °С From ethylene-propylene rubber not more than 90 °С