篮球架液压动力单元_电动篮球架_扬州瑞杰企业贸易有限公司

简介General  DeSCRJPTion
此液压动力单元专为电动篮球架设计，由高齿轮油泵、电机、多用集成块、各式液压阀、油箱等零部件有机组合为一体。构成两条独立的英武的液压上升，重力下降回路，用于篮板和篮球架走轮的升降运动，压力补偿平衡阀的应用使得篮球架走轮的下降动作十分平稳。
This  power  unit  is  designed  exclusively  for  the  electric-basketball  stand,consisting  of  high  pressure  gear  pump,  motor,  multi-functional  manifold,valves  and  tank.etc.  Constitutes  the  two  independent  martial-looking  hydraulic  pressure  rises,  the  gravity  lowering  return  route,  uses  in  the  backboard  and  basketball  stand  walks  the  round  vibratory  movement,  the  pressure  compensation  by-pass  valve's  application  causes  the  basketball  to  carry  away  by  force  round  drop  the  movement  to  be  very  steady.
说明：
1.如需不同流量的泵、压力、电机功率等系统参数，请查看液压动力单元型号说明。
1.Please  go  to  page  1  or  consult  our  sales  engineer  for  the  different  pump  displacement,motor  power  or  tank  capacity.
注意事项Special  Notes
1.安装前必须保证油缸、油管、接头等液压元件清洁无任何杂质粘附。
1.Clean  all  the  hydraulic  parts  concemed  before  mounting  the  power  unit.
2.液压油粘度应为15-68CST，应清洁无杂质，推荐使用N46号液压油。
2.The  viscosity  of  the  oil  shoud  be  15-68  cst.
3.系统使用第一个100小时后，应更换液压油，以后每3000小时更换一次液压油。
3.Change  the  oil  after  the  first  100  hours  of  using  the  power  unit,then  change  the  oil  every  3000  hours.
4.首次启动运行系统时，应立即检查油箱中的油量是否充足。
4.Check  the  oil  level  in  the  tank  after  the  first  star  of  the  power  unit.
5.本动力单元适用于水平安装。
5.Mounte  the  pump  station  horizontally.

篮球架液压动力单元

详细说明

产品说明Explain

公司简介Content

卖家名片Cards

卖家名片

扬州瑞杰企业贸易有限公司

该供应商的其他产品

你可能感兴趣