汽车尾板动力单元_汽车尾板_扬州瑞杰企业贸易有限公司

简介General  DeSCRJPTion
      此液压动力单元是用于箱式货车尾板控制的动力装置，该动力单元通过二位三通电磁阀和电磁止回阀实现尾板举升、关门、下降、开门等动作，完成货物的装卸工作下降速度可通过节流阀进行调节。本产品为自行设计，具有安装维护方便，操纵简单等特点适合水平安装使用。
This  power  unit  uses  in  the  power  unit  which  the  box-type  freight  vehicle  end  plate  controls,  this  power  unit  realizes  the  end  plate  lifting  through  two  Three  Contacts  solenoid  valves  and  the  electromagnetism  check  valve,to  close,the  drop,  to  open  the  door  and  so  on  movements,  completes  the  cargo  the  loading  and  unloading  rate  of  descent  to  be  possible  to  carry  on  the  adjustment  through  the  throttle  valve.  This  product  to  independently  design,  has  installs  the  maintenance  to  be  convenient,  the  operation  simple  and  so  on  characteristics  suit  the  level  to  install  the  use.
说明：1.如需不同流量的泵、压力、电机功率等系统参数，请查看液压动力单元型号说明。
1.Please  go  to  page  1  or  consult  our  sales  engineer  for  the  different  pump  displacement,motor  power  or  tank  capacity.
注意事项Special  Notes
1.安装前必须保证油缸、油管、接头等液压元件清洁无任何杂质粘附。
1.Clean  all  the  hydraulic  parts  concemed  before  mounting  the  power  unit.
2.液压油粘度应为15-68CST，应清洁无杂质，推荐使用N46号液压油。
2.The  viscosity  of  the  oil  shoud  be  15-68  cst.
3.系统使用第一个100小时后，应更换液压油，以后每3000小时更换一次液压油。
3.Change  the  oil  after  the  first  100  hours  of  using  the  power  unit,then  change  the  oil  every  3000  hours.
4.首次启动运行系统时，应立即检查油箱中的油量是否充足。
4.Check  the  oil  level  in  the  tank  after  the  first  star  of  the  power  unit.
5.本动力单元适用于水平安装。
5.Mounte  the  pump  station  horizontally.

汽车尾板动力单元

详细说明

产品说明Explain

公司简介Content

卖家名片Cards

卖家名片

扬州瑞杰企业贸易有限公司

该供应商的其他产品

你可能感兴趣