升降平台动力单元_轻型升降平台_扬州瑞杰企业贸易有限公司

简介General  DeSCRJPTion:
此液压动力单元由高压齿轮油泵、交流电机、多用集成块、液压阀、油箱等零部件有机结合为一体，应用于轻型升降平台、液压叉车、举升机等设备。电磁卸荷阀卸荷实现下降，下降速度由可调节流阀调节。
Consisting  of  high  pressure  gear  pump,AC  motor,multi-functional  manifold,valves,  tank,this  power  unit  has  been  widely  used  in  the  industry  of  logistic  devices  such  as  minifork  lift,scissors  lift  and  ariel  working  platform,The  loweringmovement  is  controlled  by  the  solenoid  valve  with  the  speed  controlled  by  the  adjustable  throttle  valve.
说明Remark:
1.如需不同流量的泵、压力、电机功率等系统参数，请查看液压动力单元型号说明。
1.Please  go  to  page  1  or  consult  our  sales  engineer  for  the  different  pump  displacement,motor  power  or  tank  capacity.
2.如需手动应急放油装置，请在订货时说明。
1.The  manual  override  function  is  available  on  request.
注意事项Special  Notes:
1.此动力单元不可连续运转，（1分钟ON，9分钟OFF）可重复工作。
1.The  power  unit  is  of  S3  duty,which  can  only  be  worked  intermittentiy,ie.,1  minute  on  and  9  minutes  off.
2.安装前必须保证油缸、油管、接头等液压元件清洁无任何杂质粘附。
2.Clean  all  the  hydraulic  parts  concemed  before  mounting  the  power  unit.
3.液压油粘度应为15-68CST，应清洁无杂质，推荐使用N46号液压油。
3.The  viscosity  of  the  oil  shoud  be  15-68  cst,  should  be  clean  and  free  of  impurities,hydraulic  oil  is  recommended  No.N46.
4.系统使用第一个100小时后，应更换液压油，以后每3000小时更换一次液压油。
4.Change  the  oil  after  the  first  100  hours  of  using  the  power  unit,then  change  the  oil  every  3000  hours.
5.本液压动力单元适用于水平安装。
5.The  power  unit  should  be  mounted  horizontally.

升降平台动力单元

详细说明

产品说明Explain

公司简介Content

卖家名片Cards

卖家名片

扬州瑞杰企业贸易有限公司

该供应商的其他产品

你可能感兴趣