810深孔钻油 模具钻孔冷却油热销Deep hole dri

810 deep hole drilling cutting oil pure oil mold drilling cooling oil

——Efficient cooling, precise lubrication, and industrial grade solutions

1、 Product POSTTTIONing

810 deep hole drilling cutting oil and pure oil mold drilling cooling oil are specially designed for high-precision and high load drilling scenarios, suitable for:

Deep hole drilling (hole depth to diameter ratio ≥ 10:1)
Difficult to machine materials such as mold steel, titanium alloy, quenched steel, etc
Industrial equipment such as CNC machine tools, deep hole drilling machines, precision mold processing centers, etc
2、 Core selling points
1. Ultra strong infiltration cooling technology
Nanoscale molecular structure: rapidly penetrates into the gap between the drill edge and the hole wall, reducing the cutting zone temperature to ≤ 60 ℃ and minimizing tool thermal wear.
Actual test data: Compared with ordinary cutting oil, the tool life is increased by 8% and the drilling efficiency is increased by 5%.
2. Double lubrication protection
Extreme pressure anti-wear formula: sulfur-containing chlorine composite additive, forms a stable lubricating film under high pressure, with a friction coefficient of ≤ 0.05 (ASTM D5183 standard).
Rust and corrosion prevention: The pH value is stable at 8.5-9.5, protecting the workpiece and equipment from oxidation and corrosion.
3. Environmental and safety upgrades
Low volatility and low odor: VOCs emissions are less than 50mg/m 3 (better than 80% of the national standard), improving the workshop environment.
3、 Comparison of Technical Parameters
Index 810 deep hole drilling cutting oil
Kinematic viscosity (40 ℃) * * * * mm 2/s 20-28 mm 2/s
Flash point (open cup) ≥ 175 ℃ ≥ 180 ℃
Pour point ≤ -15 ℃

4、 Case: Processing of Top Needle Holes in Automotive Molds

Material: H13 mold steel (HRC 52-54)
Pain point: The hole accuracy requirement is ± 0.02mm, and ordinary cooling oil leads to excessive roughness of the hole wall
Solution: Switch to pure oil mold drilling cooling oil
Result: The surface roughness was optimized from Ra 3.2 μ m to Ra 1.6 μ m, and the yield was increased to 28%
5、 Usage Guide

Recommended ratio:
Deep hole drilling: using the original solution without dilution


Maintenance suggestion:

Check the pH value and impurity content of the oil every 500 hours
Regularly clean the oil circuit filter of the machine tool
6、 Safety and Storage
Operation protection: Wear goggles and non slip gloves to avoid direct contact with the skin
Storage conditions: cool and sealed environment, shelf life of 36 months

810深孔钻切削油 纯油模具钻孔冷却油?

——高效冷却·精准润滑·工业级解决方案?

一、产品定位?

810深孔钻切削油?与?纯油模具钻孔冷却油?专为高精度、高负荷钻孔场景设计，适用于：

深孔钻削?（孔深径比≥10:1）

模具钢、钛合金、淬火钢?等难加工材料

数控机床、深孔钻床精密模具加工中心?等工业设备

二、核心卖点

1. 超强渗透冷却技术?

纳米级分子结构?：快速渗透至钻头刃口与孔壁间隙，降低切削区温度至 ?≤60℃?，减少刀具热磨损。

实测数据?：相比普通切削油，刀具寿命提升 ?8%?，钻孔效率提高 ?5%?。

2. 双重润滑防护?

极压抗磨配方?：含硫-氯复合添加剂，在高压下形成稳定润滑膜，摩擦系数 ?≤0.05?（ASTM D5183标准）。

防锈防腐蚀?：pH值稳定在8.5-9.5，保护工件与设备免受氧化锈蚀。

3. 环保安全升级?

低挥发低气味?：VOCs排放量 ?＜50mg/m3?（优于国标80%），改善车间环境。

三、技术参数对比?

指标? ?810深孔钻切削油? 

运动粘度（40℃）**** mm2/s 20-28 mm2/s

闪点（开口杯） ≥175℃ ≥180℃

倾点 ≤-15℃

四、案例：汽车模具顶针孔群加工?

材质?：H13模具钢（HRC 52-54）

痛点?：孔位精度要求±0.02mm，普通冷却油导致孔壁粗糙度超标

解决方案?：切换至纯油模具钻孔冷却油

结果?：表面粗糙度从Ra 3.2μm优化至Ra 1.6μm，良率提升至28%?

五、使用指南?

配比推荐?：

深孔钻削：原液使用，无需稀释

维护建议?：

每500小时检测油液pH值及杂质含量

定期清理机床油路过滤器

六、安全与储存?

操作防护?：佩戴护目镜及防滑手套，避免直接接触皮肤

储存条件?：阴凉密闭环境，保质期 ?36个月?