Heat and melt the jsw-Hot melt adhesive film for hardware at 110 ℃ - 120 ℃, apply the adhesive to the part to be bonded with a dispenser, and complete the bonding within two minutes. (the specific time depends on the ambient temperature and humidity). Hot melt adhesive film for hardware is mainly used for bonding mobile phone frame to touch screen and tablet frame to touch screen. Please empty a short section of glue nozzle before use. It is recommended that the heating time should not exceed 3 consecutive hours, and the same rubber tube should not be heated three times. In view of the future development, JSW company proposes to focus on brand, innovation and competitiveness, give full play to the leading POSTTTION of Hot melt adhesive film for hardware mature market and expand the emerging market, continue to increase investment and implement process technology development, continue to improve the performance of Hot melt adhesive film for hardware products of the company, improve the application scheme and diversified development measures, and match the "innovation" of its electronic product process with Hot melt adhesive film for hardware , fashion, simplicity "strategy.

The above is a brief introduction of Hot melt adhesive film for hardware. For detailed data, please go to the download WINOOW of jinshengwei official website. The following is the informal information of Hot melt adhesive film for hardware for reference only.

Hot melt adhesive film for hardware is a compound that flows like a liquid when it is heated and also maintains an orderly arrangement of many molecules. It can react with the change of the environmental humidity to strengthen the adhesive ability, and the humidity effect inhaled by the material gap can be used to correct the defects of the materials on both sides. Hot melt adhesive film for hardware is coated on the surface of the adhesive piece, and fasteners forming a slight humidity gradient related to adhesive discontinuity are used. In this way, Hot melt adhesive film for hardware materials will be displayed with their own adhesive properties. At this time Hot melt adhesive film for hardware bonded the product as a permanent substrate. A simple, reliable and economical method to compound the bonding defects of two-sided structures. For aluminum alloy, Hot melt adhesive film for hardware has a maximum area thickness of 0.15 mm. When the area thickness is less than 0.03mm, a gap of 0.02mm can be attached. Glue coating should be larger than the space gap to be more effective. This should be noted.

In modern industrial production, Hot melt adhesive film for hardware bonding technology is ubiquitous. In the machinery manufacturing industry, the lathe operator can use Hot melt adhesive film for hardware bonding technology to bond the expensive high-grade hard metal shell bracket to the TP screen, thus simplifying the installation procedures. once the display screen is bonded with Hot melt adhesive film for hardware, it can be firmly bonded to the tablet computer. Hot melt adhesive film for hardware bonding technology can perform better in terms of back maintenance. We know that the assembly and disassembly of machinery and equipment are inevitable, and the application of conventional machine repair technology to repair equipment often results in damage beyond our capacity. If Hot melt adhesive film for hardware bonding technology is very convenient, the fuselage can be detached and repaired by heating.

After gluing, close the TP display screen pressure flow leveling layer and maintain pressure to increase viscosity. Hot melt adhesive film for hardware will absorb trace moisture in the air, initiate polymerization and realize curing. The bonding strength is raised to the ideal requirement. Closure assembly and bonding are important technologies for bonding quality of Hot melt adhesive film for hardware. After dispensing, workpieces are tightly bonded together and aligned on the surface of the adherend. For Hot melt adhesive film for hardware, move back and forth several times after closing, until Hot melt adhesive film for hardware is aligned with the POSTTTION when closing, and do not move wrongly. Pressurize with a pressure device to increase contact, remove air and homogenize the glue layer. If any glue shortage or seam is found, timely repair the glue and press out the tiny Hot melt adhesive film for hardware rubber ring after closing.