2017/5/23 13:58:07 来源： 新乡市中隧机电设备有限公司
二次搅拌机技术规格：
1：容量：180-200L-400-600-800-1000L（可选)
2：电机功率：3KW
3：转速：54r/min
4：搅拌量：6m3/h
5：重量：200kg
6：装料高度：980mm
7：外形尺寸：直径*高度：800*1146mm 1000*1200
配合使用泵类产品
山东省青岛市矿用搅拌桶 河南双层搅拌桶产品叙述： 2016年搅拌机最新消息， 河南豫龙在这里郑重告诉大家，18年的专业性，优质 的服务，高度负责的态度，将助您走向成功。 给您一次完美的视觉享受，给您 一次美好的工作记忆 2016年最搅拌机设备行情，厂家推介。搅拌机主要是针对不同粘度浆状的液体原 料进行分散、乳化、混合，通过分散盘高速运转的新型高效搅拌设备，对物料进 行高速的强烈的剪切、撞击、粉碎、分散，达到迅速混合、溶解、分散、细化的 功能。是涂料等固体进行搅拌、分散、溶解的高效设备。与高速制浆机设备均为 高速制浆设备只是工作原理有所区别，一者为强制式另一者为涡流式，采用两者 中任何一种制浆机制浆效果都非常好。甘肃高低速搅拌机山东二次搅拌机江苏高 低速搅拌机江西二次搅拌机黑龙江高低速搅拌机云南二次搅拌机宁夏高低速制浆 机陕西双层搅拌桶贵州高低速制浆机山东省青岛市矿用搅拌桶
With the tunnel section is the radial distribution, the longitudinal 100cm and transverse 80cm in the plum blossoms. The construction process of hollow grouting anchor rod is as follows: construction preparation, drilling hole, hole cleaning, installation of anchor rod and grouting. The measurement line, calibration of anchor, and marked on the rock face. The use of drilling jumbo drilling, drilling, strictly control the direction and angle of radiation. The drilling is completed, check whether the eye straight smooth, not qualified to drilling, checked by high-pressure wind hole, through on-site supervision engineer after inspection, the bolt into the hole. The installed sleeve, stop grouting plug, plate and nut, after installation, injection of cement mortar. When grouting should be discharged in gas holes, to ensure the full grouting and grouting quality, grouting pressure control between 0.5 ~ 1Mpa, after grouting, the drawing instrument timely applied not less than 60KN prestressed. It adopts bolt tension meter for bolt tensile test of the final, tensile strength is not less than the design requirements of 150KN. It can make the construction site records including bolt length, grouting pressure, grouting quantity, time, tension resistance etc..
898995850
