阳光板施工方案之工程概括
阳光板施工方案之工程概括：
Construction scheme of sunshine plate:
一：阳光板顶棚位于三层1/L～U轴，64～62轴及对称位置两处贵宾通廊。
A: Sunshine ceiling located on the three floor of 1/L ~ U ~ 64 axis, 62 axis and symmetry at POSTTTION two VIP gallery.
阳光板顶棚采用双层做法，材料采用GE牌阳光板，外层阳光板采用20mm厚蜂窝板材、内层采用16mm厚蜂窝板材。
Sunshine plate ceiling with double practices, materials used in ge of the licence plate of sunshine, the outer layers of sunshine board with 20mm thick honeycomb plate, the inner of 16mm thick honeycomb plate.
此种做法热保温系数为0.982，其表面采用一种独特的处理工艺，能抵抗阳光中紫外线的破坏而不会减退光线传播性，不褪色，也不会为天气因素降低强度。
Such practices thermal insulation 0.982 and the surface using a unique processing technology, can resist ultraviolet light in sunlight destruction and will never diminish the transmitted light, do not fade nor for weather factors reduced intensity.
二：每一处贵宾通廊阳光板顶棚总长度42.68m，总投影宽度7.465m，起拱高度1.821m。
Two: every VIP corridor total length sunshine ceiling of 42.68m, the total projection width 7.465m, height 1.821m arch.
阳光板顶棚东西方向分三块，中间垂直投影宽度为2.889m；两端垂直投影宽度为2.288m；南北方向的顶棚分格为1m一块，最端头的分格宽度为0.91m，总投影面积为637m2。
Sunshine plate ceiling things direction can be divided into three blocks, width of the middle vertical projection 2.889m; width of both ends of the vertical projection 2.288m; roof in the north-south direction of the sub lattice of 1m a and the end sub grid width for 0.91M, the total projection area of 637m2.
在设计此种阳光板顶棚时，为了防止夹层中间有冷凝水，在东西方向主龙骨上填充分子筛，使其达到真空玻璃效果，不会因温差而出现冷凝水。阳光板与60mm×60mm×3mm镀锌方钢与主骨架连接采用铝材压条，用平头螺栓拧紧。

In designing this kind of sunshine board ceiling, in order to prevent the interlayer is arranged with condensed water, in the east-west direction on the main keel filling molecular sieve, so as to achieve the effect of vacuum glass, not because of the temperature difference and condensed water. Sunshine board and 60mm * 60MM * 3mm and the main frame connected by galvanized steel strip of aluminum, with a flat bolt.

济南阳光板：www.wanzhongyue.com
济南微信营销，济南微营销，济南微信推广：www.weidaoshang.com