|
AWS A5.14 ASME SFA A5.14
Typical Wire Chemistry
Typical Mechanical Properties
Applications ERNiCrMo-10 is used for welding nickel-chromium-molybdenum base materials to themselves, steel and other nickel base alloys, and for cladding steels. Can be used to weld duplex, super duplex stainless steels. |
Stock
|
Form |
Specification |
Supply Form |
Others |
|
Sheet |
Thickness?0.40-4.75mm?General Width?1000?1219?1500mm |
Whole Coil or piece of it |
Cold Annealed?Surface 2B?2E |
|
Plate |
Thickness?4.76-60mm?Width?1500?2000?2500mm?Length?3000?6000?8000?8500mm?Under 10mm plate can be coiled? |
Whole Coil or piece of it |
Single hot rolling?Solid solution annealed state?Surface 1D |
|
Belt |
Thickness?0.10-3.0mm?Width?50-500mm |
Whole Coil or Specified size |
Cold Annealed?Surface 2B?2E |
|
Bar & Rod |
Rolled barΦ5-45mm?Length≤1500mm |
Polished Bar?circle?Square? |
Solution annealing,descaling |
|
Forged barΦ26-245mm?Length≤4000mm |
|||
|
Weld tube |
Outer diameterΦ4.76-135mm?Wall Thickness0.25-4.00mm?Length?≤35000 mm |
Base on your requirement |
Use for PHE |
|
Seamless Tube |
Outer diameterΦ3-114mm?Wall Thickness0.2-4.5mm |
Base on your requirement |
Use for PHE |
|
Wire |
Outer diameterΦ0.1-13mm |
Base on your requirement |
Ni & Ni alloy, Ti & Ti alloy |
|
Forged piece |
roundness and square alloy |
Base on your requirement |
Steel, Alloy |
|
Flangs |
All kinds of Flangs |
Base on your requirement |
Steel, Alloy |
|
Welding Material |
Coil wire Φ0.90mm/1.2mm/1.6mm |
Base on your requirement |
Certificate of Origin?America, Sweden, Britain, Germany, Austria, Italy, France. |
|
Straight WireΦ1.2mm/1.6mm/2.4mm/3.2mm/4.0mm |
|||
|
Welding rodΦ2.4mm/3.2mm/4.0mm |
|||
|
Tube |
Elbow, three links, four links, different diameter size |
Base on your requirement |
Ni & Ni alloy, Ti & Ti alloy |
|
Explosive bonded laminate |
Raw Sheet Thickness≥2mm |
Base on your requirement |
Ni & Ni alloy, Ti & Ti alloy |
898995850
