IEEE Standard |
IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE 802.3at, IEEE802.3af |
---|---|
PoE Standard | IEEE802.3at, IEEE802,3af |
PoE RJ-45 Pin Assignment |
RJ-45 support IEEE 802.3at/af Middle-Span Alternative B mode or End-Span Alternative A mode, set by DIP SW End-Span, Alternative A mode Positive (VCC+): RJ-45 pin 1, 2. Negative (VCC-): RJ-45 pin 3, 6. Data (1, 2, 3, 6, 4, 5, 7, 8 ) Middle-Span, Alternative B mode Positive (VCC+): RJ-45 pin 4,5 Negative (VCC-): RJ-45 pin 7,8 Data (1, 2, 3, 6, 4, 5, 7, 8 ) |
Network Connector | 1 RJ-45 for 10/100/1000Base-T(X) Data, and 1 RJ-45 for 10/100/1000Base-T Data with PoE Output power |
Network Cable |
UTP/STP above Cat. 5e cable, EIA/TIA-568 100-ohm (100m) |
LED |
Per unit: Power 1 (Green), Power 2 (Green), Fault (Amber) PoE Status (Green): Flash (Over-load or short), ON : PoE normal working OFF : PoE No Power output 4/2 Pairs (Green): ON: 4 Pairs PoE Power output for 60W PoE OFF: 2 Pairs PoE Power output |
DIP SW |
SW1 Reserved SW2 ON: Hi Power 36W 36W PoE output OFF: Standard PoE 802.3af (15.4W), 802.3at (30W) SW3 ON: 4 Pair PoE Pin Ultra-High Power 60W PoE Output OFF: 2 Pair PoE Pin depand on DIP SW 1,2 SW4 ON: Alternative B mode PoE Power Pin 4, 5, 7, 8 (When DIP SW 3 Off) OFF: Alternative A mode PoE Power Pin 1, 2, 3, 6 (When DIP SW 3 Off) |
Reverse Polarity Protection | Present |
Overload Current Protection | Present |
Power Supply | Redundant Dual DC 24/48V (20~57VDC) Input power (Removable Terminal Block ) |
PoE Power Output |
Maximum Ultra High Power 60W, IEEE802.3at 30W, IEEE802.3at High power 36W, IEEE802.3af 15.4W |
Power Consumption |
Max 31.5W @24VDC input (support up to 30W for PoE Output ) Max 61.8W @24VDC input (support up to 60W for PoE Output ) |
Alarm Relay Contact | Relay outputs with current carrying capacity of 1 A @24VDCW |
Removable Terminal Block | Provide 2 Redundant power, Alarm relay contact, 6 Pin |
Operating Temperature |
0 ~ 60°C -40 ~ 75°C (-T models) |
Operating Humidity | 5% to 95% (Non-condensing) |
Storage Temperature | -40 ~ 85°C |
Housing | Rugged Metal, IP30 Protection |
Case Dimensions | 106 x 38.6 x 142mm (D x W x H) |
Weight | 0.63kg |
Installation Mounting | DIN Rail mounting or wall mounting |
EMC/EMS | CE, FCC |
EMI |
FCC Part 15 Subpart B Class A, CE EN 55022 Class A EN61000-6-4 – Emission for industrial environment |
EMS |
EN61000-6-2 – Immunity for Industrial environment EN61000-4-2 (ESD) Level 3, Criteria B EN61000-4-3 (RS) Level 3, Criteria A EN61000-4-4 (EFT) Level 3, Criteria A EN61000-4-5 (Surge) Level 3, Criteria B EN61000-4-6 (CS) Level 3, Criteria A EN61000-4-8 (Magnetic Field) Level 3, Criteria A |
Safety | UL508 (pending) |
Rail Traffic | EN 50121-4 |
Shock | IEC 60068-2-27 |
Freefall | IEC 60068-2-32 |
Vibration | IEC 60068-2-6 |
MTBF | 763,725Hrs |
Warranty | 5 years |