Automated. Sealed. Delivered. 

 Packaging Solutions for increased demand in eCommerce order Fulfillment: 

Hot Melt Adheisve Bonding Film Tape Introduction:

Hot melt adhesive bonding film tape combined with the advantages of film and hot melt technology and excellent performance on many substrates of the fibers, polyolefins, liquid crystal polymer, temperature-sensitive materials, and metal, providing temporary adhesion to permanently bond ,variety of options.Thermo-Bond Film 615，Which can replace Thermo-Bond Film 615hot melt bonding film.

JSW- JSW Thermo-Bond Film 615instructions: Please empty a small section of glue before dispensing. Heat melt the JSW3542JSW Thermo-Bond Film 615at a constant temperature of 110 ℃, apply the adhesive to the part to be bonded with the dispensing equipment, complete the bonding within 2 minutes, and maintain the pressure in the fixed tool for 10-20 minutes before moving to the next POSTTTION. It is not recommended to heat eachJSW Thermo-Bond Film 615continuously for more than three hours. The sameJSW Thermo-Bond Film 615 cannot be heated three times. Heating for a long time will make the rear part of the rubber tube touch the air temperature and form a crust, which can be pierced to reduce the glue pressure.

With the development of electronic industry, it is urgent to replace the traditional adhesive withJSW Thermo-Bond Film 615, which is faster, safer and more economical. The proportion of urban population in China's total population has increased from 26% in 1990 to 51.2% in 2011, and is expected to rise to 70% by 2035, which indicates that there are great development opportunities in the mass electronic consumer market. In the mobile phone industry, the proportion of use is also rising, so JSW Thermo-Bond Film 615 industry has a very strong development momentum in both developed and developing countries in the future. JSW615 hot melt adhesive can be applied to various materials and metals such as PMMA directly. In the WINOOW industry,JSW Thermo-Bond Film 615has been widely used. The development ofJSW Thermo-Bond Film 615for combined mobile phones and flat plates has achieved initial success and is expected to make contribution to the digital industry.

JSW's new productJSW Thermo-Bond Film 615 works with many assembly companies, and its performance may be better. Market statistics show that in the two largest digital product production areas in Shenzhen and Dongguan, the consumption ofJSW Thermo-Bond Film 615doubled year on year,